Floor Finishes

Floor Finishes FAQ

• Can floor finish be used on concrete or wood floors?

  Many floor finishes are intended for resilient flooring like VCT and certain vinyls. Concrete and wood often require different coatings or sealers. Verify the surface type and manufacturer guidance before applying, and test in a small area first.

• Do I need to strip old finish before applying a new coat?

  Not always. You can often scrub and recoat when the existing film is intact. Strip when there is heavy buildup, peeling, embedded soil, or poor adhesion, or when your maintenance schedule calls for a full reset.

• How do I choose the right floor finish for high-traffic areas?

  Prioritize a high-durability finish designed for heavy traffic and frequent cleaning, then match it to your maintenance method (burnishable if you run high-speed burnishers). Confirm the finish is compatible with your floor type and follow the recommended coat count and cure time.

• How many coats of floor finish should I apply?

  Most programs use multiple thin coats rather than one thick coat. The exact number depends on the finish and traffic level, but common practice is 3-5 coats on a properly prepared floor, following the product label directions.

• What is the difference between floor finish and floor wax?

  In commercial cleaning, "floor finish" typically refers to modern polymer coatings used on resilient floors. "Wax" is often used casually, but most facilities now use finish systems designed for durability, gloss control, and burnishing response.