LYSOL Linen Disinfectant Spray (74186CT)

To Sanitize and Disinfect:

• Pre-clean surface.
• Hold can upright 6" to 8" from surface.
• Spray 3 to 4 seconds until covered with mist.
• To sanitize:
• Surfaces must remain wet for 10 seconds then allow to air dry.
• To disinfect:
• Surfaces must remain wet for 3 minutes then allow to air dry.

To Control and Prevent Mold and Mildew:

• Apply to pre-cleaned surface
• Allow to remain wet for 3 minutes
• Let air dry
• Repeat applications in weekly intervals or when mold and mildew growth appears

Use on hard, non-porous surfaces

• Pre-clean surfaces prior to use.
• Hold can upright 6 to 8 inches from surface.
• Spray 3 to 4 seconds until covered with mist.
• Rinse toys and food contact surfaces with potable water after use.

To disinfect:

• Surfaces must remain wet for 3 minutes then allow to air dry.
• For Norovirus surfaces must remain wet for 10 minutes then allow to air dry

To sanitize:

• Surfaces must remain wet for 10 seconds then allow to air dry.

To control and prevent mold and mildew:

• Apply to pre-cleaned surface.
• Allow to remain wet for 3 minutes.
• Let air dry.
• Repeat applications in weekly intervals or when mold and mildew growth appears.

To deodorize:

• Spray on surfaces as needed.

To spot sanitize soft surfaces:

• Spray until fabric is wet.
• DO NOT SATURATE.
• Fabric must remain wet for 30 seconds.
• Let air dry.
• For difficult odors, repeat application.